Survey GPS RTK receivers in Egypt: types and how to choose
A survey GPS (GNSS RTK) receiver fixes a point to centimetre accuracy in seconds, saving a lot of time on land, road and large-area survey. This guide explains the types and differences, followed by the receivers we have.
GPS RTK receivers we have
What is RTK and who needs it?
RTK applies real-time corrections to satellite signals, so survey accuracy is in centimetres instead of metres.
- Survey offices measuring land and plans
- Contractors and road builders for setting out and level control
- Boundary, subdivision and legalisation work
Base and rover, or rover only?
- Base and rover: one receiver on a known point and one moving. Best when the site is outside correction-network coverage or you need full independence.
- Rover only: one receiver taking corrections from a network (NTRIP) over the internet. Cheaper and lighter, but needs mobile coverage and an available network.
What to check in the specifications
- Supported constellations: GPS, GLONASS, Galileo, BeiDou
- Channels and time to fix
- IMU tilt compensation for points where the pole cannot be held vertical
- Internal radio and range, and a SIM slot for NTRIP
- Battery life and dust and water protection
- Controller, field software and easy file export
Brands common in Egypt
- Hi-Target, South, CHCNAV and Stonex: strong specifications at a reasonable price
- Topcon, Sokkia, Leica and Trimble: higher ranges for projects needing long-term support
- Emlid: an economical option for some uses
New or used?
- New units come with warranty, software and updates
- Used units can save money, but check batteries and radio, confirm software and licences work, and test on a known point before handover
FAQ
How accurate is GPS RTK?
In RTK mode horizontal accuracy is usually around one to two centimetres and vertical slightly more, depending on the receiver, signal quality and corrections. Exact figures are in each product specification.
Can GPS RTK replace a total station?
In open areas and large sites, yes, and it saves time. Near tall buildings, under trees and for precise structural setting out, a total station is still better. Many crews use both.
How do I get a price for a survey GPS?
Prices depend on brand, model, base and rover or rover only, and accessories. Send us the model or the job on WhatsApp and we will reply with price and availability.
Do you calibrate and service GNSS receivers?
Yes. We check reception, accuracy, correction settings and accessories, and the cost is set after inspection and before work starts.












